Garmin G1000 Pilot's Manual page 114

AUDIO PANEL AND CNS
Setting the Audio Panel during preflight:
1) Verify that the PILOT and COPLT Annunciators are extinguished.
2) Verify that the MAN SQ Annunciator is extinguished.
3) Turn the PILOT/PASS Knobs clockwise two full turns. This will set the headset audio level to max volume (least
amount of attenuation).
4) Adjust radio volume levels (COM, NAV, etc.) a suitable level.
5) Adjust the PILOT/PASS Knob volume to the desired intercom level.
Once this procedure has been completed, the pilot and copilot can change settings, keeping in mind the notes
above.
4-38 Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C