Ident Function - Garmin G1000 Pilot's Manual

IDENT FUNCTION

In Standby Mode, the IDENT Softkey is inoperative.
NOTE:
Pressing the IDENT Softkey sends an ID indication to Air Traffic Control (ATC). The ID return distinguishes
one transponder from all the others on the air traffic controller' s radar screen. The IDENT Softkey appears on
all levels of transponder softkeys. When the IDENT Softkey is pressed, a green 'IDNT' indication is displayed
in the mode field of the Transponder Data Box for a duration of 18 seconds.
After the IDENT Softkey is pressed while in Mode or Code Selection, the system reverts to the top-level
softkeys.
Press the
IDENT Softkey
to Initiate the
ID Function
190-00590-00 Rev. C
Figure 4-38 IDENT Softkey and Indication
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
AUDIO PANEL AND CNS
IDNT
Indication
4-29