Garmin G1000 Pilot's Manual page 35

6) Press the ENT Key.
7) Enter a new profile name up to 16 characters long and press the ENT Key.
8) With 'RENAME' highlighted, press the ENT Key.
9) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
Deleting a profile:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'DELETE' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Delete Profile' window, turn the FMS Knob to select the profile to delete.
6) Press the ENT Key.
7) With 'DELETE' highlighted, press the ENT Key.
8) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
D /T
ATE IME
The Date/Time Box on the System Setup page displays the current date and time and allows the pilot
to set the time format (local 12-hr, local 24-hr, or UTC) and offset. The time offset is used to define
current local time. UTC (also called "GMT" or "Zulu") date and time are calculated directly from the GPS
satellites signals and cannot be changed. When using a local time format, designate the offset by adding or
subtracting the desired number of hours.
Setting the system time format:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the time format field in the Date/Time Box.
4) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC).
5) Press the ENT Key.
Setting the current time offset:
1) Use the FMS knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box.
4) Enter the time offset and press the ENT Key.
190-00590-00 Rev. C Garmin G1000 Pilot's Guide for the Quest Kodiak 100
SYSTEM OVERVIEW
1-25