Garmin G1000 Pilot's Manual page 154

GPS NAVIGATION
Loading a pilot control lighting frequency into selected COM standby frequency:
1) With the Airport Information Page displayed, press the FMS Knob to activate the cursor.
2) Move the cursor to the 'PCL FREQ' field in the Runways Window.
3) Press the ENT Key to place the PCL frequency in the standby field of the COM window.
4) Press the FMS Knob to remove the cursor.
ADDITIONAL AIRPORT RUNWAY INFORMATION
Runway Designation
The airport runway information field (Figure 5-33) displays runway designations, length, surface type and
lighting for the selected airport. A map image of the runway layout and surrounding area is also displayed on
the Airport Information Window. The map image range is displayed in the lower left corner and is adjustable
using the joystick. For airports with multiple runways, information for each runway is available.
5-38
Figure 5-32 Viewing a Restriction
Runway Surface
Figure 5-33 Runway Information Box
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
Runway Size
Runway Lighting
190-00590-00 Rev. C