Garmin G1000 Pilot's Manual page 43

SYSTEM OVERVIEW
Adjusting key backlighting:
1) Press the PFD MENU Key to display the PFD Setup Menu. 'AUTO' is now highlighted next to 'PFD DSPL'.
2) Turn the large FMS Knob to highlight 'PFD DSPL'.
3) Turn the small FMS Knob in the direction of the green arrowhead to display 'PFD KEY'.
4) Turn the large FMS Knob to highlight 'AUTO'.
5) Turn the small FMS Knob to select 'MANUAL'.
6) Press the ENT Key.
7) With the intensity value now highlighted, enter the desired backlighting and press the ENT Key.
8) Turn the large FMS Knob to highlight 'MFD DSPL'.
9) Turn the small FMS Knob in the direction of the green arrowhead to display 'MFD KEY' and repeat steps 4-7.
10) To remove the menu, press the CLR or MENU Key.
190-00590-00 Rev. C Garmin G1000 Pilot's Guide for the Quest Kodiak 100 1-33