Peripheral Configuration Submenu - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 8 Configuring Hardware and Utilities
Item
Multiprocessor Specification

8.2.6 Peripheral Configuration Submenu

Configures the serial port, parallel port, etc.
Main Advanced
Serial 1:
Serial Multiplexer:
Serial 2:
Parallel:
Parallel Mode:
Diskette Controller:
Floppy Type:
Local Bus IDE adapter:
Mouse Controller:
SCSI Controller:
SCSI Option ROM Scan:
LAN Controller:
LAN Remote Boot:
Help
F1
Esc Exit
Item
Serial 1
Serial Multiplexer
Serial 2
Parallel
238
table: Items on the Advanced Menu
Setting
1.4 (Fixed
parameter)
PhoenixBIOS Setup Utility
Security Server
Peripheral Configuration
[Auto]
[System]
[Auto]
[Auto]
[Bidirection]
[Enabled]
[Local]
[Both]
[Auto Detect]
[Channel A&B]
[Enabled]
[Enabled]
[Disabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled
• Enabled
• Auto (at the time of
purchase)
• OS Controlled
• System (at the time of
purchase)
• BMC
• Shared
• Disabled
• Enabled
• Auto (at the time of
purchase)
Auto (Fixed parameter)
Description
Indicates the multiprocessor table version in use.
The multiprocessor table is necessary for the operating
system for multiprocessors to recognize the system's
multiprocessor specifications.
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
F10
Description
Configures Serial Port 1.
Changes the function of Serial Port 1.
• System
Used as a serial port.
• BMC
Used as a server management port.
• Shared
The server does not support this yet.
Note:
Do not set to [Shared].
Configures Serial Port 2.
Configures the parallel port.