Exit Menu - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.13 Exit Menu

This menu exits the BIOS Setup Utility.
Main Advanced
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Help
F1
Exit
Esc
Select the option for handling BIOS settings when exiting the utility.
Item
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Initial BIOS settings and settings at the time of purchase
Some items of the initial BIOS settings and settings at the time of purchase are different. When
returning to the initial BIOS settings, set the following items to the values they were at the time of
purchase:
• "8.2.4 Boot Options Submenu" ( pg.236) of the Main menu
[POST Errors], [Fast Boot], [Quiet Boot], [MultiBoot for HDs]
• "8.2.6 Peripheral Configuration Submenu" ( pg.238) of the [Advanced] menu
[Serial 1], [Serial 2]
• "8.2.8 Advanced System Configuration Submenu" ( pg.241) of the [Advanced] menu
[CPU Timeout Counter], [CPU Halt Mode (C1E)], [NX Memory Protection], [Enhanced SpeedStep]
250
PhoenixBIOS Setup Utility
Security Server
-/+ Change Values
Select Item
Select Menu Enter Execute Command
table: Items on the Exit Menu
Save the current settings and exit the BIOS Setup Utility. After it exits the
server reboots.
Exits the BIOS Setup Utility without saving current settings. Previously
saved settings remain valid.
Returns to the server's initial values for all items. However, since there are
items that differ from the setting values at the time of purchase, after
returning to initial settings, it is necessary to change to the settings at the
time of purchase.
Sets all items to the values before the last changes by reading from CMOS.
Current setting values are discarded.
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description