Main Menu - Fujitsu PRIMERGY TX200 S2 User Manual

8.3.2 Main Menu

The [Main] menu is displayed when you start the SCSI Setup Utility.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-n.nn.nn
<Boot Adapter List> <Global Properties>
LSI Logic Host Bus Adapters
Adapter PCI
Bus
<1020/1030 2
<1020/1030 2
F1 =HELP
Esc=Abort/Exit
F2 =Menu
Use the [↓] [↑] [←] [→] keys to move the cursor to the menu where you want to change settings and
press the [Enter] key. The selected menu appears.
Item
Adapter
PCI Bus
Dev/Func
Port Number
IRQ
NVM
Boot Order
LSI Logic Control
RAID Status
Dev/ Port IRQ NVM
Func Number
40> 3000 11 Yes
41> 3400 9 Yes
ArrowKeys=Select Item
Home/End=Select Item
table: Items on the Main Menu
Displays the name of the SCSI controller. On this server, "1020/1030" is displayed.
Displays the number of the PCI bus where the SCSI controller is connected.
Displays the PCI device/function of the SCSI controller. The five upper bits
represent the device and the three lower bits represent the function.
Displays the I/O port address of the SCSI controller.
Displays the IRQ (IRQ level) of the SCSI controller.
Displays whether or not the SCSI controller has NVRAM for storing settings. On
this server, "Yes" is displayed.
Displays the boot order of SCSI controllers. When the server starts up, startable
SCSI devices connected to SCSI cards (controllers) are searched for in ascending
numerical order.
SCSI devices start up in order of detection.
Displays whether or not the SCSI controller can use standard device drivers.
The server does not support the RAID function.
PRIMERGY TX200 S2 User's Guide
Boot LSI Logic RAID
Order Control Status
0 Enabled --
1 Enabled --
-/+ =Change [Item]
Enter=Excute <Item>
Description
8
253