Fujitsu PRIMERGY TX200 S2 User Manual page 232

Chapter 8 Configuring Hardware and Utilities
While the message "<F2> BIOS Setup / <F12> BOOT Menu" is displayed, pressing the [F12] key
causes the Boot Menu screen to appear when POST completes.
1. CD-ROM Drive
2. +Diskette
3. +Hard Drive
4. Legacy LAN Card
< > Select <Enter> Confirm
●
Key Operations in the BIOS Setup Utility
The roles of the keys used for setting the BIOS Setup Utility are as follows:
table: List of Key Operations on the BIOS Setup Utility Window
Key
[F1]
[Esc]
[↑][↓]
[←][→]
[-][+]
[Enter]
[F9]
[F10]
■ How to Exit the BIOS Setup Utility
1
Use the [←] [→] keys to display the [Exit] menu.
Main
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
F1 Help
Exit
Esc
232
Boot Menu
Displays Help.
Ends this utility. In the case of a submenu it returns to the previous menu.
Scrolls through the menu option list.
Switches between menus.
Changes the value of an item.
Activates the selected item or displays the sub menu of items with the mark. In
items in which is displayed the sub menu appears.
Sets each item to its initial (default) value.
Saves the setting values and ends the operation. In the case of a submenu it returns
to the previous menu.
PhoenixBIOS Setup Utility
Advanced Security
-/+
Select Item
Select Menu Enter
Description
Server Exit
Item Specific Help
Change Values
F9
Execute Command F10
Setup Defaults
Save and Exit