Fujitsu PRIMERGY TX200 S2 User Manual page 75

After 10 seconds, installation starts automatically.
• When RAID has been configured, the system restarts.
• If a message prompting you to insert the Service Pack CD-ROM appears, insert the CD-ROM
and click [OK].
This message does not appear when Service Pack is not selected.
• If a message prompting you to insert the ServerView CD-ROM appears, insert the
PRIMERGY Document and Tool CD (Disc 1) and click [OK].
This message does not appear when ServerView will not be installed or the PRIMERGY
Document and Tool CD (Disc 1) has been inserted already.
• If a message prompting you to insert the ServerStart CD-ROM appears, insert the CD-ROM
and click [OK].
3
When a message prompting you to insert the OS CD-ROM appears, insert the
CD-ROM and click [OK].
After files are copied, a message prompting you to insert the ServerStart CD-ROM appears.
4
Insert the ServerStart CD-ROM and click [OK].
The License Agreement window appears.
5
Click [I agree].
After files are copied, a message prompting you to eject the CD-ROM and floppy disk appears.
6
Eject the CD-ROM and floppy disk and click [OK].
Then the system is restarted.
The system continues the installation operation after restart.
OS GUI setup, LAN utility installation, Service Pack installation, and Active Directory
installation are performed automatically.
7
When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
8
When a message on installation completion appears, press any key.
9
Restart the system.
Click [Start] → [Shutdown]. Select [Restart] and click [OK].
The system restarts.
10
When the system restarts, log on to the server using the Administrator account
for the local computer.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" ( pg.133) and perform necessary procedures
before starting server operations.
PRIMERGY TX200 S2 User's Guide
3
75