Fujitsu PRIMERGY TX200 S2 User Manual page 248

Chapter 8 Configuring Hardware and Utilities
Item
ASR&R Boot Delay
Power Cycle Delay
Boot Retry Counter
Diagnostic System
Temperature Monitoring
Memory Scrubbing
CPU Status
Memory Status
Console Redirection
Rom Pilot
■ CPU Status Submenu
This submenu sets whether or not to allow the use of the installed CPU.
Item
CPU 0 Status
CPU 1 Status
■ Memory Status Submenu
This submenu sets whether or not to allow the use of the installed memory.
Item
Memory Module 0A
Memory Module 0B
Memory Module 1A
Memory Module 1B
Memory Module 2A
Memory Module 2B
248
table: Items on the Server Menu
Setting
• 2 (at the time of purchase)
• 1–30
5 (Fixed parameter)
• 3 (at the time of purchase)
• 0–7
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Enabled (Fixed parameter)
Press the [Enter] key to display the "
Press the [Enter] key to display the "
Press the [Enter] key to display the "
window.
Press the [Enter] key to display the "
table: Items on the CPU Status Menu
Setting
Enabled (Fixed parameter)
table: Items on the Memory Status Menu
Setting
Enabled (Fixed parameter)
Description
Sets the standby time for startup after shutdown due
to trouble (such as overheating) in minutes. The
system restarts after the set standby time.
Sets the time until the server is turned on after it is
turned off.
Sets the maximum number of retries to boot the
operating system within the range of 0 to 7.
Sets whether or not to diagnose the BootDevice when
restarting with ASR&R.
Sets whether or not the server can be turned on when
the temperature is not in its operating environment
range (10-35 °C).
Sets whether or not to correct errors of memory space
that is currently not used by the OS or application
programs.
■
CPU Status Submenu" ( pg.248) window.
■
Memory Status Submenu" ( pg.248) window.
■
Console Redirection Submenu" ( pg.249)
■
RomPilot Submenu" ( pg.249) window.
Description
Sets whether or not to allow the use of CPUs installed
in CPU Sockets 0 and 1.
Description
Sets whether or not to allow the use of memory in
Memory Slots 0A to 2B.