Chapter 7 Configuring Hardware and Utilities
7.2.6 Peripheral Configuration Submenu
This submenu is for the serial port settings, etc.
Main
Advanced
Serial :
Serial Multiplexer :
Serial 2 :
USB Speed :
USB Devices :
Mainboard LAN Controller :
Mainboard LAN Remote Boot :
IO-Riser
LAN Controller :
IO-Riser
LAN Remote Boot :
SAS Controller :
SAS Option ROM Scan :
Info
F1
Exit
Esc
Item
Serial
Serial Address
Serial Multiplexer
Serial 2
Serial Address
USB Speed
USB Devices
Mainboard LAN
Controller
164
Phoenix TrustedCore(tm) Setup Utility
Security
Power
Peripheral Configuration
[Auto]
[System]
[Disabled]
[USB 1.1 and USB 2.0]
[Auto]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
-/+
Change Values
Select Item
Select Menu
Enter
Select
table: Peripheral Configuration submenu
Setting
• Disabled
• Enabled
• Auto (Initial value)
• OS Controlled
• 3F8h,IRQ4 (Initial value)
• 3F8h,IRQ3
• 3E8h,IRQ4
• 2E8h,IRQ3
• System (Initial value)
• iRMC
• Disabled (Initial value)
• Enabled
• Auto
• OS Controlled
• 3F8h,IRQ4
• 3F8h,IRQ3 (Initial value)
• 3E8h,IRQ4
• 2E8h,IRQ3
USB 1.1 and USB 2.0
(Unchangeable)
Auto (Unchangeable)
Enabled (Unchangeable)
Exit
Server
Boot
Item Specific Help
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
Description
This setting is for the serial port.
This is an address of serial. It appears only when the
setting of [Serial] is "Enabled".
This setting is for the serial port function.
This setting is for the serial port.
This is an address of serial 2. It appears only when
the setting of [Serial 2] is "Enabled".
This setting is for the USB controller.
Sets whether to enable the USB device.
Sets whether to enable the onboard LAN controller.