Ide Drive Submenu - Fujitsu PRIMERGY TX200 S2 User Manual

8.2.3 IDE Drive Submenu

Sets the type and operating mode for connected IDE devices.
Main Advanced
Secondary Master [CD-ROM]
Type:
Transfer Mode:
LBA Translation:
32 Bit I/O:
PIO Mode:
Ultra DMA Mode:
Help
F1
Exit
Esc
table: Items on the IDE Drive1 / IDE Drive2 / IDE Drive3 / IDE Drive4 Submenu
Item
Type
Transfer Mode
LBA Translation
32 Bit I/O
PIO Mode
Ultra DMA Mode
PhoenixBIOS Setup Utility
Security Server
[Auto]
[Disabled]
[Disabled]
[Enabled]
[Standard]
[Disabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
Setting
Auto (Fixed parameter)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Enabled (Fixed parameter)
• IDE Drive1, IDE Drive2,
IDE Drive4
Standard
• IDE Drive3
PIO4/DMA2
• IDE Drive1, IDE Drive2,
IDE Drive4
Disabled
• IDE Drive3
Mode2
PRIMERGY TX200 S2 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets the type of the IDE device.
The server does not support this yet.
The server does not support this yet.
Specifies the bus width for data transfer between
the processor and the IDE controller.
Displays the data transfer mode.
Cannot be changed.
Cannot be changed.
8
235