Fujitsu PRIMERGY TX200 S2 User Manual page 283

4
Enter the name of the file to save the system event log to, and press the [Enter]
key.
The system event log is saved to the floppy disk under the specified file name.
■ Deleting the System Event Log
1
Start Server Management Tools.
The menu window of Server Management Tools appears.
2
Use the [↑] and [↓] keys to select [System Event Log (SEL)], and press the
[Enter] key.
The [SYSTEM EVENT LOG (SEL)] window appears.
3
Press the [F3] key.
A confirm delete window appears.
4
Press the [Enter] key.
This deletes the system event log.
Selecting [System Event Log (SEL)] right after deleting the system event log will result in an error.
Allow approximately 10 seconds to select it normally.
PRIMERGY TX200 S2 User's Guide
9
283