Power On/Off Submenu - Fujitsu PRIMERGY TX200 S2 User Manual

8.2.9 Power On/Off Submenu

Configures power On/Off settings.
Main Advanced
Advanced System Configuration
Power Off Source
Software:
Power Button:
Power On Source
Remote:
LAN:
Wake up Timer:
Wake up Time:
Wake up Mode:
Power Failure Recovery:
Help
F1
Exit
Esc
Item
Power Off Source
Software
Power Button
Power On Source
Remote
LAN
Wake Up Timer
Wake Up Time
Wake Up Mode
PhoenixBIOS Setup Utility
Security Server
[Enabled]
[Enabled]
[Bios Controlled]
[Enabled]
[Enabled]
[Disabled]
[00:00:00]
[Dally]
[Previous State]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Power On/Off Submenu
Setting
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
• BIOS Controlled (at the
time of purchase)
• ACPI Controlled
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed parameter)
Displays the startup time when using "Wake Up Timer".
Displays the startup mode when using "Wake Up Timer".
PRIMERGY TX200 S2 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets whether or not to enable the power to be turned
off using a program or the operating system.
Sets whether or not to allow the use of the power
switch for turning the power off, when the ACPI
function is disabled.
Configures the power-on setting.
Sets whether or not the power is turned on when the
modem (connected to the serial port) receives a ring
signal.
Sets whether or not to enable the power to be turned
on via LAN.
Sets whether or not the power is turned on at a
certain time or after a certain time has passed. A
separate program is necessary for setting startup
time.
8
243