Peripheral Configuration Submenu - Fujitsu Primergy TX120 User Manual

Hide thumbs Also See for Primergy TX120:
Table of Contents

Advertisement

Chapter 8 Configuring Hardware and Utilities

8.2.6 Peripheral Configuration Submenu

Use this submenu to set the serial port, parallel port, etc.
The items not listed in the figure below can be displayed using the scroll bar.
Main
Advanced
Serial 1:
Serial Multiplexer:
USB Enable Ports:
USB 2.0 Host Controller:
USB BIOS Supported Device:
USB Boot Delay:
Diskette Controller:
Mouse Controller:
LAN Controller:
LAN Remote Boot:
Management LAN:
Help
F1
Esc
Exit
Item
Serial 1
Serial 1 Address
Serial Multiplexer
USB Enable Ports
USB 2.0 Host Controller
USB BIOS Supported
Devices
USB Boot Delay
Diskette Controller
Mouse Controller
LAN Controller
198
Security
Server
Peripheral Configuration
[Auto]
[System]
[All]
[Enabled]
[Auto]
[0 s]
[Disabled]
[Auto Detected]
[Enabled]
[Disabled]
[Enabled]
-/+
Change Values
Select Item
Select Menu
Enter
Select
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled
• Enabled
• Auto (Initial value)
• OS Controlled
3F8h (Unchangeable)
• System (Initial value)
• iRMC
All (Unchangeable)
Enabled (Unchangeable)
Auto (Unchangeable)
Os (Unchangeable)
• Disabled (Initial value)
• Enabled
Auto Detect (Unchangeable)
Enabled (Unchangeable)
Exit
Item Specific Help
F9
Setup Defaults
Save and Exit
Sub-Menu
F10
Description
Sets whether to enable or disable the serial port.
Appears when [Enabled] is selected for [Serial 1].
Switches the function of serial port 1.
• System
Uses this port as a serial port (Setting at the time
of UPS connection).
• iRMC
Uses this port as a server management port.
Sets whether or not to use the USB port.
Sets whether or not to enable the USB controller
(2.0 standard).
Sets whether the USB device can be used on the OS
that does not support USB.
Sets the delay time by the second for initializing
USB mass storage device during the POST.
Configures the floppy disk controller.
Sets whether or not to use the mouse connected to
the mouse port.
Sets whether to enable or disable the onboard LAN
controller.

Advertisement

Table of Contents
loading

Table of Contents