How To Install The Internal Hard Disk Unit Bay Conversion Kit - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 7 Installing Hardware Options
11
Connect the SCSI cable to the onboard SCSI port or the SCSI Ctrl U160 (PG-
128).
When connecting to the onboard SCSI port
When connecting to the SCSI Ctrl U160
For how to install a SCSI Ctrl U160, refer to "7.5.3 How to Install an Expansion Card"
( pg.202).
12
Connect the power cable to the 5-inch internal devices.
Connect the power cable to the internal devices to which the SCSI cable is connected.
13
Attach the ventilation system cover.
Make sure to avoid pinching cables when attaching.
14
Attach the front and side covers.
7.7.4 How to Install the Internal Hard Disk Unit Bay
Conversion Kit
When the Upgrade kit 6 hard disks 2 channel (2x3) is used, the internal hard disk unit bay conversion
kit cannot be installed.
1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the side and front covers.
"7.2 Removing and Attaching Covers" (pg.176)
3
Touch a metal part of the server to discharge static electricity.
220
Onboard SCSI connector B