Oce BLM500 User Manual page 97

Stitching
Trimming
Stacker Capacity
Paper Input
Requirements
Dimensions
Weight
Power Supply
Power Consumption
Noise Emission
Approvals
* Standard book is made from 20 sheets of 80gsm paper, with 2 stitches.
Production may vary according to operating conditions. In line with a policy of
continual product improvement, the manufacturer reserves the right to alter the
materials or specification of this product at any time without notice.
1-6 stitches, evenly spaced on the spine of the book
Stitches/spool: up to 291,500
Books*/spool: approximately 127,000
Maximum fore-edge trim: 28mm
Minimum trimmed book size: 80mm
[61]
min. 80mm†
† Serial no. 22 onwards
35 books*
Input sheets must be of consistent size and cut square.
Machine setting must match paper size at the input to the
Océ BLM500
Book quality is dependent upon quality of input sheets.
Footprint: 1870 x 1675mm
Height - 1330mm maximum
Océ BLM500 including stitching wire: 542kg
As above, plus bridge and bridge covers: 702kg
Adjustable to 200, 208, 220, 230 and 240V
50/60Hz, single phase
stand-by: 92VA (75W)
in operation: 700VA (500W)
stand-by: ambient
in operation: 66 dB (A), peak 87 dB (A)
Complies with CE and UL. Conforms to FCC rules Part
15 Class A.
max. 28mm
Specifications
97