The Rear Panel Of The Océ Blm500 - Oce BLM500 User Manual

The Rear Panel of the Océ BLM500
The Rear Panel of the Océ BLM500
Illustration
[3]
[3] The Rear Panel of the Océ BLM500
Component - function table
[3]
[3] The Rear Panel of the Océ BLM500
A
B
C
D
E
F
10 Chapter 1 Introduction to the Océ BLM500
Component
Rating and serial
label
Mains power
ON/OFF switch
Voltage advisory
label
Fuses
Voltage label
Mains power input
connector
A
B
C
D
E
F
Function
The rating label displays the type of machine, serial
number, power use and fuse information.
The mains power ON/OFF switch turns the Océ
BLM500 ON or OFF. When you turn OFF the Océ
BLM500, the current settings are stored.
The voltage advisory label tells the installer to refer
to the installation instructions before the Océ
BLM500 is connected to mains power. The Océ
BLM500 can be adjusted for one of several
different input voltages.
The fuses make sure the operator and the machine
are protected if there is an electrical problem or
short circuit.
The voltage label is fitted to the Océ BLM500
during the installation procedure. The voltage label
displays the selected voltage.
The mains power input connector is used to
connect the Océ BLM500 to mains electrical
power.