Table of Contents
Advertisement
Problem
Stitch position
adjusting
STITCH TIMEOUT
TOO MANY PAGES
TOUCH PAD ERROR There is a fault with the START
Touch START to clear
machine
Trim axis moving
TRIM BIN OPEN
TRIM BLADE NOT
PARKED
USER STOP
Cause
The stitch position is adjusting.
This message clears when the
adjustment is complete.
There is an internal error. If the
problem continues, then call
your service engineer.
The printer has delivered more
than 55 sheets into the gathering
area. Remove the incorrect set.
Correct the printer setting.
and STOP touch pads. If the
problem continues, then call
your service engineer.
There may be some paper in the
machine. Touch START
clear the machine before you
start a new job.
The trim axis (size adjustment)
is moving. This message clears
when the adjustment is
complete.
The trim bin is not fitted or is not
contacting the safety switch. Fit
the trim bin.
The trim blade is in the wrong
position. Touch START
reset the position.
The user has touched the STOP
button while the machine is in
operation. Touch START
restart the machine.
Error Messages
Solution
(see 'Open the
Gathering Area
Cover' on page
to
to
to
39)
55
Advertisement
Table of Contents
