Load And Save The Job Settings - Oce BLM500 User Manual

Load and Save the Job Settings

Load and Save the Job Settings
Introduction
The current job settings can be saved to the memory and reloaded for use again at a
later date. Load the 'Default Job Template' to reset the Océ BLM500 to normal
settings.
Save a job
Touch LOAD & SAVE
1.
If these options appear, select one.
2.
REPLACE to over-write the previous job with the current job settings.
SAVE NEW to save the current job with a new name.
CANCEL to cancel the job save.
Enter the name for the job on the keyboard
3.
Touch OK or CLOSE.
4.
Load a job
Touch LOAD & SAVE
1.
Touch the job name or use the Up arrow and the Down arrow to select the job.
2.
Touch LOAD.
3.
Wait until the Océ BLM500 has made the adjustments.
4.
Reset the Océ BLM500 to default settings
Touch LOAD & SAVE
1.
Select the Default Job Template from the list of jobs.
2.
Touch LOAD.
3.
Touch YES.
4.
34 Chapter 4 Standard Tasks
> SAVE.
.
.