Table of Contents
Advertisement
The LOAD & SAVE Window
The LOAD & SAVE Window
Introduction
The LOAD & SAVE
given a name. The jobs are displayed in a list on the screen. Touch the job name or
use the Up arrow or Down arrow to make the selection.
Button overview
[11]
[11] The LOAD & SAVE Window Buttons
Button
SAVE
- REPLACE
- CANCEL
- SAVE NEW
JOB DETAILS
LOAD
28
Chapter 3 The User Interface
window lets you save and reload job settings. Each job is
Information
Touch SAVE to save the current settings. An on-screen
keyboard is displayed. Enter the job name. Touch OK or
CLOSE. The new job appears in the list of saved jobs.
You can reload a saved job to decrease set-up time in the
future.
If you change the settings of a saved job, touch
REPLACE to save the new settings.
Touch CANCEL if you do not need to save a job that you
have changed.
If you change the settings of a saved job, touch SAVE
NEW to save the new settings as a new job. An on-screen
keyboard is displayed. Enter the new job name. Touch
OK or CLOSE. The original job is not changed. If the
job name is not changed before OK or CLOSE is
touched, the job will be saved with the current name
followed by an asterisk *.
JOB DETAILS shows the settings for each saved job.
Select the job that you need to view from the job list.
Touch JOB DETAILS to see a summary of the job
settings.
Touch the job name or use the Up arrow or the Down
arrow to make the selection. Touch the LOAD button
(1 – 2)
Advertisement
Table of Contents
