Oce BLM500 User Manual page 63

Jam in the Gathering Area
Open the connecting bridge cover.
1.
Lift the gathering area cover.
2.
Remove the jammed paper.
3.
Check the belts are in the correct position. Adjust the position of the belts if
4.
necessary.
Close the gathering area cover.
5.
Close the connecting bridge cover.
6.
Continue the print job.
7.
Jam in the Stitch Area
[34]
Step
1
2
3
4
5
6
7
8
Jam in the Folder or Former Area
Open the folder cover.
1.
Remove the jammed paper. If you cannot see the paper in the former area.
2.
in the Trim Area' on page
Close the folder cover.
3.
If there is paper in the gathering area, touch PURGE SET. This action clears paper
4.
from the Océ BLM500.
Continue the print job.
5.
figure 28 on page 62
Action
Open the folder cover.
Lift the clincher frame.
Remove the jammed paper.
Check for broken or damaged
stitches in the clincher area.
Manually operate the clincher to
clear any stitches that are jammed.
Lower the clincher frame.
Close the folder cover.
If there is paper in the gathering area,
touch PURGE SET.
Continue the print job.
64)
Clear Paper Jams
Information
(see 'Open the Folder Cover' on
page 36)
(see 'Lift and Lower the Clincher
Frame' on page 37).
[29]
A
Press to manually operate the
clincher.
(see 'Lift and Lower the Clincher
Frame' on page 37)
This action clears paper from the
Océ BLM500.
(see 'Jam
63