Run the Job
Make sure the adjustments on the Océ BLM500 are complete before you release the
1.
print job from the print queue.
Start the print job. The Océ BLM500 starts automatically.
2.
Check the quality of the first book
3.
Check the quality of the first book. If the quality is not acceptable, make adjustments.
4.
(see 'Book Quality' on page
Result
During the job
Unload books from the stacker before the stacker is full. The Océ BLM500 stops
and displays a message if the stacker is full.
Empty the trim bin from time to time. The Océ BLM500 displays a message if
the trim bin is full.
56)
(see 'Empty the Trim Bin' on page
Run the Job
41)
19