Table of Contents
Advertisement
[11] The LOAD & SAVE Window Buttons
Button
PADLOCK
SYMBOL
DELETE
VIEW OF JOB LIST VIEW OF JOB LIST changes the order that saved jobs
- A->Z
- BY USE
- BY INDEX
Information
The padlock symbol shows when a saved job is locked or
unlocked. There is a small padlock symbol next to each
locked job. To lock or unlock a job.
1. select the job from the job list
2. touch the large key symbol.
A padlock symbol displayed in light grey shows that a
job has been locked by a supervisor to prevent changes to
the settings
To delete a particular job it must be unlocked. Touch the
job name or use the Up arrow or Down arrow to make the
selection from the job list. Touch and hold DELETE. A
red line appears. The red line fills from left to right. Hold
DELETE until the red line reaches the right-hand side.
are listed. There is a line between Factory Template jobs
and jobs saved by the operator. The Factory Template
jobs are at the top of the list
Touch A->Z to list the jobs in alphabetical order.
Touch BY USE to list jobs in the order they were last
used. The most recently-run job is at the top of the list.
Touch BY INDEX to list jobs in numerical order. the
machine gives a number to all jobs that are saved.
The LOAD & SAVE Window
(2 – 2)
29
Advertisement
Table of Contents
