Clean The Polyurethane Strips In The Form Clamp - Oce BLM500 User Manual

Clean the Polyurethane Strips in the Form Clamp

When to do
Follow this procedure if there are dirty marks near the spine on the front and back
cover of the book. Ink and toner can collect on these parts, especially when you make
thin books.
Required tools
Alcohol wipe, Océ article number 1060060887 or
a lint free cloth and alcohol (isopropanol)
Caution: Only use alcohol to clean this part of the machine. Other
chemicals can damage the machine.
Note: If you push the eject rollers, the rollers can move together against your hand.
This movement can alarm you, but is not dangerous.
Illustration
[43]
[43] Detail A: Polyurethane strips
[49]
Step Action
1 Open the folder cover
2 Use an alcohol wipe, or apply a small
amount of alcohol to a lint free cloth.
Clean the Polyurethane Strips in the Form Clamp
A
Information
83