Oce BLM500 User Manual page 93

Install the Stitch Wire into the Stitch Head
[59]
Step
1
2
3
4
5
Close the Océ BLM500
[60]
Step
1
2
3
Action
Pull the stitch wire from the
end of the stitch wire guide.
Make sure the stitch wire runs
behind the gas-strut.
Feed the end of the stitch wire
between the felt
wire-cleaning pads.
Push the stitch wire into the
stitch wire guide block.
Push the stitch wire as far as
possible.
Action
Close the stitch wire cabinet.
Lower theOcé BLM500 main
deck.
Lower the clincher frame.
Install New Stitch Wire
Information
[55]
[56]
Detail A: Felt Wire-Cleaning Pads
[57]
Push stitch wire in direction of arrow
[58]
A
Detail A:Make sure the stitch wire runs
between the wire feed rollers and into
the middle wire tube.
Information
(see 'Lower the Clincher Frame' on
page 38).
A
93