Lubricate The Wire-Feed Cam - Oce BLM500 User Manual

Lubricate the Wire-feed Cam

Introduction
[49]
[49] Lubricate the wire-feed cam
[54]
A
B
C
Lubricate the wire-feed cam
[55]
Step
1.
2.
3.
4.
5.
Nozzle for the tube of grease
Wire-feed cam
Feed lever
Action
Lift the PSQ main deck.
Apply 10mm of grease from the tube
between the bearing surface of the
wire-feed cam and the feed lever.
Lower theOcé BLM500 main deck
Lower the clincher frame.
Close all of the covers
Lubricate the Wire-feed Cam
A
B
C
Information
figure 49
[50]
10mm
Lower the Clincher Frame
page 38
on
89