Table of Contents
Advertisement
Book Quality
Book Quality
Paper Size and Book Quality Instructions
Careful measurement of the paper size and set thickness is important.
To make an accurate book you must enter accurate paper dimensions into the
touch screen.
Measure the size of the printed paper. The paper dimension changes when the
paper is printed.
If the book is made from several different types of paper, make sure the different
paper types are all the same size. If the size of the paper is different, an accurate
book cannot be made.
Adjustments to the FORM settings can be necessary for some types of paper.
Machine Adjustments
Machine adjustments can be made while the machine is in operation. The PAPER
SIZE adjustment is limited to a maximum of +/- 1mm when the machine is in
operation.
[28]
Book Quality
Problem
The finished book is
not tidy
56
Chapter 5 Error Conditions, Problems and Solutions
Cause
The wrong paper size
was entered on the
touch screen.
The book is made from
paper that is different
sizes.
The Océ BLM500
adjustment system is
not calibrated
correctly.
The static elimination
bars are dirty.
Incorrect function of
the static elimination
bars.
Solution
Measure the paper and enter the
correct dimensions
(see 'Enter
the Job Settings' on page
Only use paper of the same size
(see 'Paper Size and Book
Quality Instructions' on
page
56).
Touch RE-REF in the
ADVANCED window to
calibrate the Océ BLM500
adjustment axes.
(see table 12
on page
30)
Clean the static elimination bars
(see 'Clean the Static
Elimination Bars' on page
Call your service engineer.
14).
80).
Advertisement
Table of Contents
