Table of Contents
Advertisement
Error Messages
Problem
ERROR IN TRIM
AREA
FLOW ERROR -
BRIDGE
FLOW ERROR -
FORMER
FLOW ERROR -
OUTFEED
Fold blade axis
moving
FOLD BLADE NOT
PARKED
FORM CLAMP
CLOSED
FORM ROLLER
ERROR
FORM ROLLER NOT
PARKED
GATHERING AREA
COVER OPEN
JAM AT BRIDGE
INFEED
52
Chapter 5 Error Conditions, Problems and Solutions
Cause
There is an error at the trimmer.
Check the machine for a paper or
book jam.
There is an error at the
connecting bridge. Open the
connecting bridge cover and
check for a paper jam.
There is an error at the former.
Open the folder cover and
remove the book or books. If
necessary, open the main deck to
remove the book or books.
There is an error at the outfeed.
Check the outfeed. If necessary,
remove the trim bin and open the
trim stop guard to remove the
book or books.
The fold blade axis (book
thickness adjustment) is
moving. This message clears
when the adjustment is
complete.
The fold blade is in the wrong
position. Touch START
reset the position.
The form clamp is in the wrong
position. Touch START
reset the position.
The form roller is jammed. Clear
the jam and continue.
The form roller is in the wrong
position. Touch START
reset the position.
Close the gathering area cover if
you need to operate the machine
online.
There is a paper jam at the infeed
to the connecting bridge. Clear
the jam and continue.
Solution
(see 'Clear Paper
Jams' on page
Jam in the Folder or
Former Area
on
page 63
Jam in the Trim Area
on page 64
to
to
(see 'Jam in the Trim
Area' on page
to
(see 'Clear Paper
Jams' on page
60)
64)
60)
Advertisement
Table of Contents
