Table of Contents
Advertisement
Problem
JAM AT FORM
ROLLER
JAM BEFORE
TRIMMER
JAM IN
CONNECTING
BRIDGE
JAM IN
GATHERING AREA
JAM IN STACKER
AREA
JAM IN STITCHER
AREA
JAM IN TRIMMER
MANUALLY PARK
SHUTTLE
MISSING STITCHES The machine has detected
Cause
The form roller is jammed. Open
the folder cover and remove the
jam.
There is a book jammed before
the trimmer. Clear the jam and
continue.
There is a paper jam in the
connecting bridge. Clear the jam
and continue.
There is a paper jam in the
gathering area. Open the
connecting bridge cover, lift the
connecting bridge and remove
the paper jam.
There is a paper jam at the
outfeed of the machine. Remove
the jammed books and continue.
There is a paper jam in the stitch
area. Open the folder cover,
remove the paper jam and
continue.
There is a book jammed in the
trimmer. Clear the jam and
continue.
The shuttle is not parked
correctly. Open the folder cover
and move the shuttle to the park
position. Close the folder cover.
The shuttle will reset. When the
message list is clear, continue
operation.
missed stitches. Check if the
stitch wire is jammed or if the
stitch wire spool is empty.
Error Messages
Solution
(see 'Jam in the Trim
Area' on page
64).
(see 'Jam before the
Trimmer' on page
64).
(see 'Jam in the
Connecting Bridge' on
page
62)
(see 'Jam in the
Gathering Area' on
page
63)
(see 'Jam in the Stitch
Area' on page
63)
(see 'Jam in the Trim
Area' on page
64)
Manually park the
Shuttle
on page 74
(see 'Clear a Stitch
Wire Jam' on page
67)
(see 'Install New Stitch
Wire' on page
90)
53
Advertisement
Table of Contents
