Table of Contents
Advertisement
Book Quality
Book Quality
Problem
The stitch is not on the
center line of the spine
The books do not stack
on the stacker
The book cover is dirty
or marked
Spine Form Problems
[29]
Spine Form
[21]
58
Chapter 5 Error Conditions, Problems and Solutions
Cause
The wrong paper size
was entered on the
touch screen.
The Océ BLM500
adjustment system is
not calibrated
correctly.
The collection table is
in the wrong position.
The former roller is
dirty.
The former clamp is
dirty.
Condition
Correct
The spine is square at
each end and the paper is
not damaged.
Solution
Measure the paper and enter the
correct dimensions.
Touch RE-REF in the
ADVANCED window to
calibrate the Océ BLM500
adjustment axes.
(see table 12
on page
30)
Adjust the position of the
collection table to fit the size of
the finished book.
(see 'Adjust
the Gate in the Gathering Area'
on page
44)
Clean the former roller
'Clean the Former Roller' on
page
82).
Clean the Polyurethane Strips
in the Form Clamp
on page 83
Solution
The Océ BLM500 setting
is correct. Adjustment is
not needed.
(see
Advertisement
Table of Contents
