Hitachi GS4000 Series Installation Manual page 74

Hide thumbs Also See for GS4000 Series:
Table of Contents

Advertisement

GS4000 Installation Guide Revision 4.00
(6) NE1G-12SA
The NE1G-12SA is a Network Interface providing 12 Ethernet ports (10BASE-SX/100BASE-
LX-LH).
*
Front View
The LED indicators are listed in Table 1.6-7
Figure 1.6-7
LEDs
Table 1.6-7
Name
Color
STATUS
Green/Yellow/Red
G: LINK 0~11
Green/Yellow
Y: LINE ERR
0~11
U S2
Green
U S3
Green
D S2
Green
D S3
Green
1-56
NOTE: SFP is required when using NE1G-12SA. See the section 1.8 "GBIC, SFP, XFP"
for information about SFP.
LEDs
Front Panel of the NE1G-12SA
LED Indications on the NE1G-12SA Front Panel
Role
Shows the action
status of NIF.
Shows the action
status of an
interface line.
Shows the processing status of packets (for hardware debugging).
Action Status
Green (ON): operation possible.
Yellow (ON): locked out
Green (blinking): in preparation for startup
Red (ON): failure detected
OFF: NIF powered off(NIF exchangeable)
Green (ON): link established
Green (blinking): link established or frames being sent/received
Yellow (ON): failure detected
OFF: When STATUS LED is green (ON);
--link failure, locked out
Ethernet Port
520-10-026-30X

Advertisement

Table of Contents
loading

Table of Contents