Hitachi GS4000 Series Installation Manual page 259

Hide thumbs Also See for GS4000 Series:
Table of Contents

Advertisement

Step 3
Open the small levers (not the big ones) towards the direction indicated in the
figure below. The network interface board will come out 15 mm or so towards you.
Lever
Figure 5.7-9
*
520-10-026-30X
Network Interface Unlocked
NOTE:
When removing a NIF from the slot, do it holding its levers so that its
connector part is detached smoothly. When moving levers, do it slowly without
giving much pressure to them.
NOTE:
The big levers, which are located under the small ones, are not used for the
purpose of unlocking a NIF, therefore do not try to open them forcibly.
GS4000 Installation Guide Revision 4.00
Lever
5-55

Advertisement

Table of Contents
loading

Table of Contents