Table of Contents
Advertisement
Step 4
Loosen the screws of the power supply.
Screws
Figure 5.4-21 Screws to Be Removed From the Power Supply
Step 5
Hold the handles of the power supply, and remove the power supply by pulling its
handle towards you.
Handles
Figure 5.4-22 Power Supply Removed From the Device
!
520-10-026-30X
Caution: The Power Supply weighs approx. 4kg and its depth is 148mm. When
detaching the DC power supply from the device, do it by holding its handles
firmly, so that it cannot drop accidentally and cause an injury.
Caution: Whenever you use GS4000 without mounting its option modules into it, attach
the blank panels to it. Otherwise, air flows for the device cannot be secured
and the temperature inside the device heats up, causing troubles in it.
GS4000 Installation Guide Revision 4.00
148 mm
5-29
Advertisement
Table of Contents
