Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
4.5.4 Attachment/Detachment of GS4000-80E2 Power Cables
(1) Attachment of a Cable
WARNING: BECAUSE DC POWER CABLES ARE CONNECTED TO TERMINAL
WARNING: MAKE SURE THAT THE CIRCUIT BREAKER OF A POWER FACILITY IS
Step 1
Remove the terminal board cover from the terminal board.
Power Supply (POW-HSDCE)
Figure 4.5-4
Step 2
Remove the terminal cover from the terminal board.
Figure 4.5-5
4-22
BOARDS, ATTACHING OR REMOVING A DC POWER CABLE TO OR FROM
THE DEVICE MUST BE DONE BY A TRAINED MAINTENANCE PERSON.
MISHANDLING DC POWER CABLES CAN CAUSE A FIRE OR AN ELECTRIC
SHOCK.
SET TO OFF BEFORE ATTACHING OR REMOVING A DC POWER CABLE.
ATTACHING OR REMOVING A DC POWER CABLE WITH THE CIRCUIT
BREAKER SET TO ON WILL CAUSE AN ELECTRIC SHOCK.
Removal of the Terminal Board Cover
Removal of the Terminal Cover
Terminal Board Cover
Terminal Board
Terminal Cover
Screw (M2.5)
520-10-026-30X
Advertisement
Table of Contents
