Power Supplies (Ps); Pow-Hmace - Hitachi GS4000 Series Installation Manual

GS4000 Installation Guide Revision 4.00
1.3

POWER SUPPLIES (PS)

*

1.3.1 POW-HMACE

This is the AC100/200V power supply used for GS4000-80E1 and GS4000-160E1.
(1) Outer Appearance
See Table 1.3-1 for LED Indicators.
Power Supply Connector
Mounting Screw
Handle
Figure 1.3-1
(2) LEDs
In the AC100/200V power supply for GS4000-80E1 and GS4000-160E1, the action status is
indicated by the combination of the two LEDs as shown in Table 1.3-1.
Table 1.3-1
Name
POWER
（LED = Green）
Power ON
Power OFF
Power OFF
Note: There is the possibility that both POWER LED and ALARM LED are powered off depending on the type of trouble.
(3) Accessories
No accessories provided.
1-34
NOTE: Do not install optional components from a GR4000 or GS4000 into devices other
than another GR4000 or GS4000. Doing this causes a fire or an electric shock.
Outer Appearance of POW-HMACE
LED Indicators on the POW-HMACE Front Panel
Action Status
ALARM
（LED = Red）
Power OFF Output voltage is normal.
Power ON Output voltage is abnormal.
Power OFF
Power is OFF or the output voltage is abnormal.（Note）
Power Switch
LEDs
Mounting Screw
520-10-026-30X