Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
(1) Detachment of a Network Interface Board
Comply with the following procedure when removing a Standard NIF.
Step 1
Remove the interface cable from the NIF targeted for replacement. (As for the
detachment of an interface cable, refer to the section 4.11 Connecting Interface Cables to the
GS4000.)
Step 2
Loosen the screws of the network interface board.
Screws
Figure 5.7-2
5-48
Screws
NIF
Screws to Be Removed From the Network Interface Board
520-10-026-30X
Advertisement
Table of Contents
