Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
3.1
CONNECTION OF CABLES/TERMINALS
Figures 3.1-1 below show the connections between the GS4000 models and interfaces. For the
details about interface cables, see the section 3.2 Interface Cable Specification, and for the
details about setup terminals and cables to be connected to them, see the section 3.3 The
Setup Terminal and Cable Connections.
3.2.1 1000BASE-SX/1000BASE-LX multi-mode
optic fiber cable (core diameter 50 μm)
3.2.2 1000BASE-SX/1000BASE-LX multi-mode
optic fiber cable (core diameter 62.5 μm)
3.2.3 1000BASE-LX single-mode
optic fiber cable (core diameter 10 μm)
3.2.4 1000BASE-SX/1000BASE-LX multi-mode
optic fiber cable (core diameter 50 μm)
3.2.5 1000BASE-SX/1000BASE-LX multi-mode
optic fiber cable (core diameter 62.5 μm)
3.2.6 1000BASE-LX/1000BASE-LH single-mode
optic fiber cable (core diameter 10 μm)
3.2.7 1000BASE-LH single-mode (DSF)
optic fiber cable (core diameter 8 μm)
3.2.8 10GBASE-ER/10GBASE-EW single-mode
optic fiber cable (core diameter 10 μm)
3.2.9 10GBASE-LR/10GBASE-LW single-mode
optic fiber cable (core diameter 10 μm)
Figure 3.1-1
3-2
Customer's Responsibility
GS4000 Connecting Cable Distribution Diagram (1/2)
GS4000
NE1G-12S
NE1G-12SA
NE1GSHP-4S
NE1GSHP-8S
S12-1G48S
(SFP-SX/SFP-SXA)
(SFP-LX/SFP-LXA)
(SFP-SX/SFP-SXA)
(SFP-LX/SFP-LXA)
(SFP-LX/SFP-LXA)
NE1G-6G
NE1G-6GA
(GBIC-SX)
(GBIC-LX)
(GBIC-SX)
(GBIC-LX)
(GBIC-LX)
(GBIC-LH)
(GBIC-LH)
NE10G-1ER
NE10G-1EW
NE10G-1LR
NE10G-1LW
Hitachi's Responsibility
Continued on Next Page
520-10-026-30X
Advertisement
Table of Contents
