Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
•
Do not put the device on an unstable or uneven place. Instead, put the device on a
stable and flat surface to prevent it from falling and causing damage.
•
When installing the GR4000 or GS4000 on a desk, lay it down horizontally in its normal
orientation. If you stand it vertically or lean it against a wall, it could fall and be
damaged and potentially cause injury.
•
Do not remove the cover when it is operating, since this can cause you to receive a
shock.
•
Make sure that the device is in a stable, secure position when mounting it into a rack. If
you try to install it without anchoring it to the rack, it could fall out.
•
In the event that the device or any of its components is damaged, immediately turn off
power and remove the power cable from the source. Contact a qualified service
technician. Using the device in a damaged condition could cause a fire or an electric
shock.
•
Do not put a metal object, such as a pin or paperclip, or a vase or flower pot on the
GR4000 or GS4000. Water or objects falling into the chassis could cause a severe
electrical shock to anyone touching the device.
•
To avoid injury, the GR4000-80E1, GR4000-80E2, GS4000-80E1 or GS4000-80E2
should be carried by no less than three people. The table below shows the weight of
each device:
Model
GR4000-80E1
GS4000-80E1
GR4000-80E2
GS4000-80E2
•
The following labels are attached to the GR4000-80E1, GR4000-80E2, GS4000-80E1 or
GS4000-80E2:
x
Maximum Weight in kg (lbs)
45 (99)
40 (88)
Number of People Required to Move the Device
Three or more
520-10-026-30X
Advertisement
Table of Contents
