Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
(2) Attachment of a Basic Control Unit
Comply with the following procedure when installing a Basic Control Unit.
Step 1
Open the levers of the basic control unit as shown in the figure below, and insert it
into the slot.
Basic Control Unit Slot
Lever
Figure 5.5-4
!
5-40
Basic Control Unit Being Inserted
Caution: When installing a Basic Control Unit into the device, open its levers as shown
in the figure above. If you try to install it with its levers shut or open too wide,
its levers might be damaged when being inserted into the slot.
Basic Control Unit
520-10-026-30X
Advertisement
Table of Contents
