Table of Contents
Advertisement
(2) Case of Connecting An Operation Terminal to the CONSOLE (10BASE-T/100BASE-TX) Port of
GS4000
When connecting an operation terminal to the CONSOLE (10BASE-T/100BASE-TX) port of
GS4000, this should be done with the 10BASE-T/100BASE-TX interface cables.
10BASE-T/100BASE-TX
Interface Cable
Figure 4.10-3 An Operation Terminal Connected to the GS4000
Step 1
Connect the 10BASE-T/100BASE-TX interface cable (RJ45 connector) to GS4000.
(Insert the connector firmly until it clicks.)
RJ45 Connector
Figure 4.10-4 10BASE-T/100BASE-TX Interface Cable Connected to GS4000
Step 2
Likewise, connect the 10BASE-T/100BASE-TX interface cable (RJ45 connector) to the
Ethernet port of an operation terminal.
520-10-026-30X
Basic Control Module (BCU)
CONSOLE Port
(10BASE-T/100BASE-TX)
GS4000 Installation Guide Revision 4.00
CONSOLE Port
(10BASE-T/100BASE-TX)
Operation Terminal
4-39
Advertisement
Table of Contents
