Table of Contents
Advertisement
E18E
10. To unattach these wires - un-clip from the wires on the stepper
motor side as shown below.
Press down this tab
11. Bundle all wires together and clip with supplied wire clip - as
shown below.
12. Attach the receiver to the fl oor of the unit with a velcro pad - also
peel off paper on back side of wire clip and place wires conveniently
in appliance.
13. Switch on left side of faceplate must be in <ON> position.
14. Match the remote control to the receiver - see remote control
instructions.
15. Reverse steps 2 and 1.
919-803
2
installation
Regency
E18E-11 Gas Fireplace Insert
®
|
67
06.26.17
Advertisement
Table of Contents
