installation
10. Remove Serial No. Decal attached to valve assembly and affix to wall of
28C firebox.
Montigo Serial Decal
11. Flatten left and right louver brackets.
Flatten louver brackets
12. Flatten flange (left ,right and rear) in locations shown below.
32
|
Regency
E18E-11 Gas Fireplace Insert
®
13. Cut to remove left and right cross piece at front of firebox.
Cut out front cross piece to remove
14 Cut out back cross bar to complete modification. Fold back any excess
metal after removing the cross piece.
Cut out back cross bar