Table of Contents
Advertisement
installation
MODIFICATION OF FIRESONG 220N
1. Turn off and Disconnect Gas and Power.
2. Remove Valve Cover (See Diagram 9.1).
3. Remove the Bottom of the Firebox and Sand Pan in one assem-
bly (See Diagram 9.2).
48
|
Regency
E18E-11 Gas Fireplace Insert
®
Diagram 9.1
Diagram 9.2
4. Unscrew and Remove Front Inner Baffle (See Diagram 9.3).
5. Cut the Sides of the Rear Inner Baffle at the Back of the Firebox
(See Diagram 9.4).
6. Bend the Inner Rear Baffle up so it is flush with the back of the
Firebox or cut off the Baffle if it will not bend flat with the back of
the Firebox.
Diagram 9.3
Diagram 9.4
Advertisement
Table of Contents
