Table of Contents
Advertisement
MODIFICATION OF MONTIGO 28F-3
1. Turn off unit, disconnect gas and power.
2. Remove Top and Bottom Louvers.
3. Remove Screen Mesh (See Diagram below) or Bifold Doors.
4. Remove Logs and Sand from Sand Pan.
5. Disconnect Pilot Gas Line and Pilot Thermopile from the Valve.
Disconnect Thermostat wires from valve.
Diagram 1
Diagram 2
6. Disconnect valve from main burner Line (See Diagram 3).
7. Unscrew left and right side nuts, under the firebox, holding down
the Sand Pan. (see Diagram 4)
Regency
installation
Diagram 3
Diagram 4
E18E-11 Gas Fireplace Insert
®
|
39
Advertisement
Table of Contents
