13. Unscrew the plate located between the 2 fixed bars, as shown
below.
Diagram 11
14. Unscrew the plate locating underneath, as shown below.
15. Unscrew the side* and back plates located in the firebox, as
shown below.
*Not all unit have side plates
Diagram 12
Diagram 13
16. Remove the inside plate located at the rear of the cut plate.
17. Cut the sides of the top face, as shown below.
Regency
installation
Diagram 14
Diagram 15
Diagram 16
E18E-11 Gas Fireplace Insert
®
|
41