Suzuki LT-Z90 Manual page 59

• Remove the cylinder head nut 9 in diagonal stages, and then
remove the cylinder head 0 .
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic mallet.
CYLINDER
• Remove the cylinder head gasket 1 and dowel pins.
• Remove the cam chain guide 2 .
• Remove the cylinder 3 .
NOTE:
If the cylinder does not come off easily, lightly tap it using a plas-
tic mallet.
• Remove the cylinder gasket 4 and dowel pins.
PISTON
• Place a clean rag over the cylinder base to prevent the piston
pin circlip 1 from dropping into the crankcase.
• Remove the piston pin circlip 1 .
ENGINE 3-11