Final Reduction Gear Box Oil - Suzuki LT-Z90 Manual

Hide thumbs Also See for LT-Z90:
Table of Contents

Advertisement

2-12
PERIODIC MAINTENANCE
OIL STRAINER INSPECTION AND CLEANING
• Drain the engine oil as descried in the engine oil replacement
procedure.
• Remove the oil strainer cap 1 and oil strainer 2 .
• Clean the oil strainer with compressed air also check the oil
strainer for wear and damage. If any defects are found,
replace it with a new one.

FINAL REDUCTION GEAR BOX OIL

Inspect every 6 months.
Replace every 2 years.
FINAL REDUCTION GEAR BOX OIL REPLACEMENT
• Place the vehicle on level ground.
• Remove the left footrest mudguard. (
• Remove the front cooling duct connector 1 and rear cooling
duct connector 2 .
• Remove the crankcase cover 3 .
• Remove the oil filler cap 4 .
• Remove the drain plug 5 and drain the oil into an oil pan.
• Reinstall the drain plug 5 .
• Pour new oil through the oil filler hole until the oil flows from oil
filler hole.
• Reinstall the oil filler cap 5 .
Final reduction gear box oil capacity:
Oil change: 90 ml (3.0/3.2 US/Imp oz)
Overhaul: 100 ml (3.4/3.5 US/Imp oz)
5-5)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents