Suzuki LT-Z90 Manual page 108

3-60 ENGINE
• Remove the spiral spring 9 from the recoil starter case 0 .
REASSEMBLY
Reassemble the recoil starter in the reverse order of disassem-
bly. Pay attention to the following points:
• When installing the spiral spring, hook the spiral spring end 1
with the recoil starter case.
Wear hand and eye protection when installing the reel,
since the spiral spring may quickly unwind and cause
an injury.
• Apply SUZUKI SUPER GREASE "A" to the spiral spring.
99000-25010: SUZUKI SUPER GREASE "A"
• Turn the rope on the reel properly.
• After installing the spiral spring, engage the part A of the reel
with the spiral spring end 2 .
• Hook the rope onto the hook part B of the reel.
• Turn the reel counterclockwise three or four times with the
rope.
• Lace the end of the rope through the recoil starter case hole
C .
• Tie a knot at the end of the rope.
• Install the cap 3 to the knob 4 .
(or equivalent)